Skip to content

Superannuation

Key points

The mandatory superannuation you need to pay on top of your employees' wages is called the Superannuation Guarantee and it's currently 11.5% of an employee’s ordinary time earnings.

If you need to pay more than this minimum rate, see Additional superannuation contributions.

Super not calculating correctly? See Checking and adjusting superannuation.

Setting up super in MYOB

There are a few things you need to set up before you can pay your employees' super contributions, including adding your employees' super funds and setting up Pay Super.

Superannuation in your employees' pays

Once you've added super funds and set up Pay Super, you want to make sure your employees' super contributions will be calculated correctly in their pays.

MYOB comes with a set of superannuation pay items which you can use to calculate and track your employees' super payments. This includes a default Superannuation Guarantee pay item which you can assign to employees who are entitled to these contributions. Tell me more about pay items.

To view the superannuation pay items, go to the Payroll menu and choose Pay items then click the Superannuation tab.

To view the superannuation pay items, go to the Payroll menu and choose Pay items then click the Superannuation tab.

These superannuation pay items can be set up to suit your needs, or you can create new ones.

Single Touch Payroll

Don't forget to choose the ATO reporting category for each superannuation pay item you use. This ensures the super is reported correctly to the ATO. If unsure, check with your accounting advisor or the ATO.

Learn more about assigning ATO reporting categories for Single Touch Payroll reporting.

To assign the super guarantee pay item to an employee

AddAdd
  1. Go to the Payroll menu and choose Pay items.

  2. Click the Superannuation tab.

  3. Click to open the Superannuation Guarantee pay item. 

    The details of the Superannuation Guarantee pay item are displayed.

  4. Under Allocate employees, choose the employees who are entitled to super guarantee contributions.

  5. Click Save.

If you want to check the setup of the Superannuation Guarantee pay item, see To set up a superannuation pay item below.

To set up a superannuation pay item

AddAdd

If the superannuation pay items that come with MYOB don't suit your needs, you can create new ones.

  1. Go to the Payroll menu and choose Pay items.

  2. Click the Superannuation tab

  3. Click Create super pay item.

    In the Details section

  4. Enter a Name for the pay item.

  5. Choose the Contribution type.

    • Employee additional (deduction) - the contribution will be deducted from the employee's net pay (see Additional superannuation contributions)

    • Employer additional (expense) - the contribution will be paid by the employer in addition to gross pay (see Additional superannuation contributions)

    • Productivity (expense) - the contribution will be paid by the employer in addition to gross pay

    • Redundancy (expense) - the contribution will be paid by the employer in addition to gross pay

    • Salary sacrifice (deduction) - the contribution will be deducted from the employee's gross pay (see Setting up salary sacrifice superannuation)

    • Spouse (deduction) - the contribution will be deducted from the employee's net pay

    • Superannuation guarantee (expense) - the contribution will be paid by the employer in addition to gross pay.

  6. Choose the Linked expense category. This is the category to which you allocate employer expense superannuation pay items.
    We recommend you create an expense category called Superannuation Expense and select it as the linked expense category.

  7. Choose a Linked payable category. This is the liability category to which the superannuation amounts are allocated each time you do a pay run.
    We recommend you create a liability category called Superannuation Liability and select it as the linked payable category.

  8. Choose the ATO reporting category for this super pay item. Learn more about assigning ATO reporting categories for Single Touch Payroll.

    Helping you stay compliant with ATO super reporting

    The ATO reporting category for superannuation pay items with a contribution type of Superannuation guarantee (expense) will be automatically set to Superannuation guarantee.

     In the Super information section

  9. (Optional) Select the option Print on pay slip if you want amounts for this super pay item to be shown on pay slips.

  10. Choose the Calculation basis.

    • Minimum required rate—this option is chosen by default as it's the easiest way to stay compliant with super rate changes. This option means MYOB will automatically calculate the correct amount of super for your employees based on the Date of payment in the pay run. For example, if the date of payment is 1 July 2023 or later, a super guarantee rate of 11% is used. Learn more about staying compliant with super guarantee rate increases.

    • User entered amount per pay—allows you to enter an amount at the time the pay is processed each pay period. Choose this option if the amount varies regularly.

    • Equals a percentage of wages—allows you to enter a percentage of a pay item (such as a wage, deduction or superannuation) or a percentage of all wage pay items (by choosing Gross Wages or Federal Wages). The superannuation will be calculated until the limit is reached.

    • Equals dollars per pay period—allows you to enter a specified amount per pay period, per hour, per month or per year until the specified limit is reached.

  11. Enter any applicable Exclusions to exclude an initial amount of eligible wages before this super will calculate.

  12. Choose the Limit. Superannuation limits can be used to place a ceiling on the superannuation calculation.

    For example, for an Employee Additional superannuation deduction of $30 per pay period and a limit of 2% of gross wages, a pay with gross wages of $1000 yields superannuation of only $20 (i.e. 2%).

    Limit can be one of the following three choices:

    • No limit signifies no limit to the superannuation calculated for this pay item.

    • Equals a percentage of wages results in the maximum superannuation calculated being a percentage of wage, deduction or superannuation pay items. For example, an Employer Additional superannuation contribution might be $20 per pay period, but this should not exceed a maximum of 20% of the employee’s base salary.

    • Equals dollars per pay period results in the maximum superannuation calculated being a fixed amount per pay period, per hour, per month or per year. For example, a Salary Sacrifice superannuation might be 5% of the employee’s gross wages up to $1000 per year.

  13. Enter any applicable Threshold. If this superannuation calculation is only payable if wages exceed a specified amount per month, enter this amount in the Threshold field.
    For example, if the threshold is $450 per month, then this superannuation won't calculate until the employee’s gross wage exceeds $450 per month.
    When determining whether the gross wages on a pay exceeds the threshold per month, other pays issued that month are included.

    From 1 July 2022, the Australian Government has removed the $450 per month threshold for super guarantee eligibility. This means superannuation must be paid on all ordinary times earnings for pays dated 1 July 2022 or later. For pays dated 1 July 2022 or later, this field will be ignored. Learn more about the removal of the $450 earnings threshold for super.

    In the Allocate employees section

  14. Choose the employees to be assigned this super pay item. To remove an employee, click the delete  icon for that employee.

    In the Exemptions section

  15. Choose all wage pay items that should not accrue this superannuation. If you're not sure, check with your accounting advisor or the ATO.

  16. When you're done, click Save.

To delete a superannuation pay item

AddAdd

You can only delete a superannuation pay item if it hasn't been used in an employee's pay.

  1. Go to the Payroll menu and choose Pay items.

  2. Click the Superannuation tab.

  3. Click to open the superannuation pay item to be deleted.

  4. Click Delete.

  5. At the confirmation message, click Delete.

To prevent superannuation calculating on a wage pay item

AddAdd

If a superannuation pay item is set up to calculate as a percentage (the Calculation basis is set to Equals a percentage of wages), it can be exempted from calculating on a wage pay item. For example, you might have an allowance that doesn't accrue super.

If you're not sure if super should calculate on a particular wage pay item, check with your accounting advisor or the ATO.

  1. Go to the Payroll menu and choose Pay items.

  2. Click the Superannuation tab.

  3. Click to open the superannuation pay item which shouldn't be calculated on the wage pay item.

  4. Under Exemptions, choose all wage pay items to be excluded from calculating this type of super. If you can't choose any wage pay items, it means the Calculation basis for the super pay item isn't set to Equals a percentage of wages, so you can't prevent it from calculating on wages.

  5. Click Save.

Learn more about wage pay items.

FAQs

What is "Your Future, Your Super"?

AddAdd

'Your Future, Your Super' (YFYS) legislation applied from 1 November 2021 and it ensures an employee's existing super fund is "stapled" to them. And it's not as painful as it sounds.

In a nutshell, if a new employee has already contributed to a super fund, that super fund may follow them from one job to the next.

Under YFYS, you'll need to request a new employee's stapled super fund from the ATO if:

  • you need to make super guarantee payments for that employee, and

  • the employee is eligible to choose a super fund, but doesn’t.

If your employee has self-onboarded (by you sending a request for their details), they'll actively choose a super fund so you won't need to request anything from the ATO.

If an employee chooses to use your default super fund, you'll need to contact the fund to obtain a membership number for the employee. You can then enter their membership number into their employee record (Payroll > Employees > open the employee's record > Payroll details tab > Superannuation tab).

To learn more, check out these resources:

How do I set my business's default super fund?

AddAdd

You need to specify your business's default super fund that your employees' may choose to use when they start working for you.

To set this fund, go to the settings menu (⚙️) and choose Payroll settings Default Superannuation Fund. To learn more about selecting your default super fund, visit the ATO website.

An employee can choose a different fund which you can specify when adding the employee to MYOB.

If an employee chooses to use your default super fund, you'll need to contact the fund to obtain a membership number for the employee. You can then enter their membership number into their employee record (Payroll > Employees > open the employee's record > Payroll details tab > Superannuation tab).

What super rate do I use for pays that span payroll years?

AddAdd

If you've selected the Minimum required rate calculation basis in your super guarantee pay item, the applicable rate will be used based on the Date of payment in the pay run.

For example:

  • If the Date of payment is June 30 or earlier, a super guarantee rate of 10.5% will apply.

  • If the Date of payment is July 1 or later, a super guarantee rate of 11% will apply.

This means if the pay period includes dates in June and July, the Date of payment will determine which super rate will be applied.

How do I pay super for a contractor?

AddAdd

To pay super from MYOB you need to process the super payments through payroll. This means to pay super for a contractor you'll need to set up the contractor as an employee to pay their super. Just manually add them as an employee and enter their super details.

If you pay the contractor via invoices they send you, you will also need to set the contractor up as a supplier so you can pay their bills like any other. Then when you process your payroll to pay super for the contractor, only enter the super amount into their pay (and no other amounts). You can then declare the pay to the ATO as part of your STP reporting.